中文部分
1.王啟秀、孔祥科、左玉婷,「全球能源產業趨勢研究-以台灣太陽能光電產業為例」,中華管理評論國際學報,第十一卷,第三期(2008)。2.林彥輝、宋鵬程、葉文裕、游志雲、潘儀聰、陳志勇,「先進國家肌肉骨骼傷害防制推動計畫探討」,勞工安全衛生研究季刊,第十八卷,第四期),第483-501頁(2010)。3.蘇裕仁,「重量不均衡物件抬舉之上肢生物力學分析」,碩士論文,朝陽科技大學,台中(2009)。4.潘儀聰、劉俊杰、黃耀新、盧士一、李正隆、游志雲,「工作現場人因工程危害預防效益個案評估」,勞工安全衛生研究季刊,第21卷,第3期,第345-355頁(2013)。5.巫智弘,「人工搬運作業 之生物力學模式建立與評估」,碩士論文,朝陽科技大學,台中(2005)。6.莊舜弘,「日益頻繁的職業疾病:職業性肌肉骨骼傷害」,勞工安全衛生簡訊,第七十五期,第2-3頁(2006)。
7.戴基福、楊瑞鍾、葉文裕,「受僱者工作環境安全衛生狀況認知調查」,勞工安全衛生研究所研究報告,No. 304,臺北(2001)。
8.宋鵬程,「精密鑄造業肌肉骨骼傷害之危害因子評估」,第十五屆中華民國人因工程學會年會暨學術研討會,台中(2008)。
9.梁文敏、郭憲文、王昶弼、陳秋蓉,「1999年台灣地區勞工職業傷害與作業環境危險因素之探討」,勞工安全衛生研究季刊,第10卷,第4期,第285-294頁(2002)。10.許勝雄、彭游、吳水丕,人因工程第三版,滄海書局,台北,第89-95頁(2004)。
11.應宜雄、陳志勇,「以生物力學法評估勞工下背傷害之研究—檢核表之製作」,勞工安全衛生研究所研究報告,No. 334,臺北(2001)。
12.李正隆、林彥輝,「勞工下背痛預防研究-三度空間動態評估模式驗證」,勞工安全衛生研究所研究報告,No. 323,臺北(1996)。
13.游志雲,「手腕部施力資料值規範」,勞工安全衛生研究所研究報告,No. 122,臺北(2000)。
14.陳志勇、陳協慶,「上肢重複性傷害危險因子現場監測技術開發」,勞工安全衛生研究所研究報告,No. 345,臺北(2002)。
15.廖欣怡,「作業面高度對於勞工上肢重複性作業之生理負荷評估」,碩士論文,朝陽科技大學工業工程與管理系,臺中(2004)。16.趙國竣,「製造業上肢肌肉骨骼危害與重複性危害因子探討」,碩士論文,朝陽科技 大學工業工程與管理所,台中(2005)。17.吳水丕、許芳榮,「非對稱提舉方式對男性提舉能力之效應」,勞工安全衛生研究季刊,第11卷,第4期,第251-260頁 (2003)。
18.蔡秉昇,「負重移動角度、抬舉高度與頻率對非對稱抬舉能力影響之研究」,碩士論文,華梵大學工業管理學系,臺北 (2002)。19.李開偉,實用人因工程學第二版,全華科技圖書股份有限公司,臺北 (2003)。
20.王家濠,「人工抬舉作業能量效率的研究」,碩士論文,朝陽科技大學工業工程與管理研究所,臺中(2007)。21.潘儀聰、陳志勇、林軒丞、盧士一、李正隆、杜信宏,「工作現場人因工程改善建議方案—以食品配料作業為例」,勞工安全衛生研究季刊,第22卷,第2期,第191-207頁(2013)。英文部分
22.Bennell, K. L., Crossley, K., “Musculoskeletal injuries in track and field: incidence, distribution and risk factors,” Australian Journal Of Science And Medicine In Sport, Vol. 28, No. 5, pp. 69-83(1996).
23.Bernard, T.M., Ayoub, M.M., and Lin, C.J., “Evaluation of a biomechanical simulation model for sagittal plane lifting”, International Journal of Industrial Ergonomics, Vol. 24, pp. 157-171 (1999).
24.Chung, H.C., Wang, M.J., “The effects of container design and stair climbing on maximal acceptable lift weight, wrist posture, psychophysical, and physiological responses in wafer-handling tasks”, Applied Ergonomics, Vol. 32, pp. 593-598 (2001).
25.Chen, Y.L., “Changes in lifting dynamics after localized arm fatigue”, International Journal of Industrial Ergonomics, Vol. 25, pp. 611-619 (2000).
26.Cheng, C.-K., Chen, H.-H., Kuo, H.-H., Lee, C.-L., Chen, W.-J., Liu, C.-L.,“A three-dimensional mathematical model for predicting spinal joint force distribution during manual liftings”, Clinical Biomechanics, Vol.13, Supplement No. 1, pp. s59-s64(1998).
27.Ciriello, V.M., “The effects of box size, vertical distance, and height on lowing tasks for female industrial workers”, International Journal of Industrial Ergonomics, Vol. 35, pp. 857-863 (2005).
28.Ciriello, V.M., “The effects of boxsize, vertical distance, and height on lowering tasks”, International Journal of Industrial Ergonomics, Vol. 28, pp. 61-67 (2001).
29.Dolan, P., Adams, M.A., “Repetitive lifting tasks fatigue the back muscles and increase the bending moment acting on the lumbar spine”, Journal of Biomechanics, Vol. 31, pp. 713-721 (1998).
30.Dai, G.F., Investigate of environ-mental, safety and health for employee in work, Institute of labor, Occupational safety and health, Ministry of labor, IOSH90-H304, (2001).
31.Dolan, P., Adams, M.A., “Repetitive lifting tasks fatigue the back muscles and increase the bending moment acting on the lumbar spine”, Journal of Biomechanics, Vol. 31, pp. 713-721 (1998).
32.Ferguson, S.A., Marras, W.S., “A literature review of low back disorder surveillance measures and risk factors”, Clinical Biomechanics, Vol. 12, No. 4, pp. 211-216 (1997).
33.Gagnon, M., Delisle, A., and Desjardins, P., “Biomechanical differences between best and worst performances in repeated free asymmetrical lifts”, International Journal of Industrial Ergonomics, Vol. 29, pp. 73-83 (2002).
34.Guo, Y.L., Syu, B.J., Cai, P.J., Su,D.S., Jhang, H.Y., Su, H.J., Huang, J.Y., Wu, P.J., Li, J.J., Su, S.J., Introduction of Occupational Disease, A HUA-SING publishing house, 73-78,(2001).
35.Gardner, L.I., Landsittel, D.P., Nelson, N.A., Risk Factors for Back Injury in 31,076 Retail Merchandise Store Workers, American Journal of Eqidemiology, 150(8), 825-833,(1999).
36.Hamrick C., “Overview of Ergonomic Assessment.” In W.S. Marras & W.Karwoski (eds), Fundamentals and Assessment Tools for Occupational Ergonomics, Taylor & Francis Group, Vol. 34,pp.1-11(2006).
37.Habes, D., Carlson, W., and Badger, D., “Muscle fatigue associated with repetitive arm lifts: effects of height, weight and reach”, Ergonomics, Vol. 28, pp. 471-488 (1985).
38.Hagen, K.B., and John W.K., “Physical work strain of dairy farming in loose housing barns”, International Journal of Industrial Ergonomics, Vol. 10, pp. 122-127(1995).
39.Investigate of environmental, safety and health in work - Investigate of human engineering risk factor, Institute of labor, Occupational safety and health, Ministry of labor,(2001).
40.Kumar, S., “The physiological cost of three different methods of lifting in sagittal and lateral planes”,Ergonomics,Vol. 27,pp. 425-433(1984).
41.Kingma, I., de Looze, M.P., Toussaint, H.M., Klijnsma, H.G., and Bruijnen, T.B.M., “Validation of a full body 3-D dynamic linked segment model”, Human Movement Science, Vol. 15, pp. 833-860 (1996).
42.Lin, C.J., Ayoub, M.M., Bernard, T.M.,“Computer motion simulation for sagittal plane lifting activities”, International Journal of Industrial Ergonomics, Vol. 24, pp. 141-155 (1999).
43.Lee, T.H., “Minimal acceptable handling time intervals for lifting and lowering tasks”, Applied Ergonomics, Vol. 34, pp. 629-634 (2003).
44.Mital, A., “Comprehensive maximum acceptable weight of lift database for regular 8-hour work shifts”, Ergonomics, Vol. 27, No. 11, pp. 1127-1138 (1984).
45.Maiti, R., and Ray, G.G., “Determination of maximum acceptable weight of lift by adult Indian female workers”, International Journal of Industrial Ergonomics, Vol. 34, pp. 483-495(2004).
46.Plamondon, A., Gagnon, M., and Desjardins, P., “Validation of two 3-D segment models to calculate the net reaction forces and moments at the L5/S1 joint in lifting”, Clinical Biomechanics, Vol. 11, pp. 101-110 (1996).
47.Perkio-Makela, M., and Hentila, H., “Physical work strain of dairy farming in loose housing barns”, International Journal of Industrial Ergonomics, Vol. 35, pp. 57-65(2005).
48.Wu, S.P., “Maximum acceptable weight of lift by Chinese experienced male manual handlers”, Applied Ergonomics, Vol. 28, pp. 237-244 (1997).
49.Wu, S.P., “Maximum acceptable weights for asymmetric lifting of Chinese females”, Applied Ergonomics, Vol. 34, pp. 215-234 (2003).
50.Wu, S.P., Chen, J.P., “Effect of the adjustment period on psychophysically determined maximum acceptable weight of lift and the physiological cost”, International Journal of Industrial Ergonomics, Vol. 31, pp. 287-294 (2003).
51.Waters T. R., Putz-Anderson V., Garg A., “ Applications Manual for the Revised NIOSH Lifting Equation, ”U.S. Department of Health and Human Services, Public Health Service (1994).
52.Yoon, H., Smith, J.L., “Psychophysical and physiological study of one-handed and two-handed combined tasks”, International Journal of Industrial Ergonomics, Vol. 24, pp. 49-60 (1999).
53.Zhang, X., Nussbaum, M.A., and Chaffin, D.B., “Back lift versus leg lift: an index and visualization of dynamic lifting strategies”, Journal of Biomechanics, Vol. 33, pp. 777-782 (2000).