[1] 楊忠義、許富銓、蕭美枝、李正雄(2010), “超音波振動輔助加工於玻璃材料加工研究”, 工程科技與教育學刊, 第七卷(第一期):64-74。
[2] U hlmann E. (1998),“Surface formation in creep feed grinding of advanced ceramics with and without ultrasonic assistance” , Annals of the CIRP 47: 249-252.
[3] P. Legge (1964), “Ultrasonic drilling of ceramics”, Industrial Diamond
Review 24: 20-24.
[4] Z.J. Pei, P.M. Ferreirag (1988), “Modeling of ductile-mode materialremoval in rotary ultrasonic machining”, International Journal of Machine Tools and Manufacture 38: 1399-1418.
[5] Z.J. Pei, P.M. Ferreirag (1999),“An experimental investigation of rotary ultrasonic face milling”, International Journal of Machine Tools and Manufacture 39: 1327-1344.
[6] Fang, F. Z. ,Chen, L. J.(2000),“Ultra - Precision Cutting for ZKN7 Glass ”, Annals of the CIRP 49: 17-20.
[7] P Hu , J.M Zhang, Z.J Pei ,Clyde Treadwell (2002),“Modeling of material removal rate in rotary ultrasonic machining: designed experiments”, Journal of Materials Processing Technology 129 : 339-244.
[8] 潘冠衛(2004),“振動加工應用於高速微銑削之研究”, 國立雲林科技大學機械工程研究所碩士論文。[9] W.M. Zeng, Z.C. Li, Z.J. Pei, C. Treadwell (2005),“Experimental observation of tool wear in rotary ultrasonic machining of advanced ceramics”, International Journal of Machine Tools and Manufacture 45 : 1468-1473.
[10] R. Singh, J.S. Khamba (2007), “Taguchi technique for modeling material removal rate in ultrasonic machining of titanium”, Materials Science and Engineering 461-461 : 365-369.
[11] B. Azarhoushang, J. Akbari (2007),“Ultrasonic-assisted drilling of Inconel 738-LC”, International Journal of Machine Tools and Manufacture 47 : 1027-1033.
[12] Y.S. Liao, Y.C. Chen, H.M. Lin (2007),“Feasibility study of the ultrasonic vibration assisted drilling of Inconel superalloy”, International Journal of Machine Tools and Manufacture 47 : 1988-1996.
[13] J. Pujana, A. Rivero, A. Celaya, L.N. López de Lacalle (2009),“Analysis of ultrasonic-assisted drilling of Ti6Al4V”, International Journal of Machine Tools and Manufacture 49 : 500-508.
[14]江宗翰(2011),“智能化精微工具機開發與光學玻璃微結構加工研究”,國立臺灣師範大學機電科技研究所碩士論文。[15] Muhammad Aziz, Osamu Ohnishi, Hiromichi Onikura (2012),“Novel micro deep drilling using micro long flat drill with ultrasonic vibration” , Precision Engineering 36: 168-174.
[16] Mohsen Ghahramani Nik, Mohammad R. Movahhedy, Javad Akbari (2012) ,“Ultrasonic-Assisted Grinding of Ti6Al4V Alloy”, Procedia CIRP 1: 353-358.
[17] 蕭國忠(2005),“利用迴轉式超音波於陶瓷煞車片鑽孔之實驗設置與研究”,國立台北科技大學車輛工程研究所碩士論文。[18] E. Uhlmann, G. Spur (1998),“Surface Formation in Creep Feed Grinding of Advanced Ceramics with and without Ultrasonic Assistance”, CIRP Annals - Manufacturing Technology 47: 249-252.
[19]Hu Gong , F.Z.Fang , X.T.Hu (2010),“Kinematic view of tool life in rotary ultrasonic side milling of hard and brittle materials”, International Journal of Machine Tools & Manufacture 50: 303-307.
[20] Dongxi Lv, Hongxiang Wang, Yongjian Tang, Yanhua Huang, Zhiping Li (2013),“Influences of vibration on surface formation in rotary ultrasonic machining of glass BK7”, Precision Engineering.