[1] http://www.e-cuttech.com/webnews/4890.html
[2]http://towaagkgj.pixnet.net/blog/post/61431635-%E4%B8%BB%E8%BB%B8%E6%80%A7%E8%83%BD%E5%B0%8D%E9%AB%98%E9%80%9F%E5%88%87%E5%89%8A%E5%8A%A0%E5%B7%A5%E4%B9%8B%E5%BD%B1%E9%9F%BF
[3] https://kknews.cc/zh-tw/news/8vnpzn.html
[4] 林寬泓,工具設計,新科技書局,1997年。
[5] Gudmundsson, J. T., N. Brenning, D. Lundin, and U. Helmersson, J Vac. Sci. Technol. A 30 (2012)030801.
[6] K. Sarakinos, J. Alami, S. Konstantinidis, Surf. Coat. Technol. 204 (2010) 1661.
[7] D. Lundin, K. Sarakinos, J. Mater. Res. 27 (2012) 780.
[8] U. Helmersson, M. Lattemann, J. Bohlmark, A.P. Ehiasarian, J.T. Gudmundsson, Thin Solid Films 513(2006) 1.
[9] J. Alami, Z. Maric, H. Busch, F. Klein, U. Grabowy, M. Kopnarski, Surf. Coat. Technol. (http://dx.doi.org/10.1016/j.surfcoat.2013.11.040)
[10] J. Lin, W.D. Sproul, J.J. Moore, Z.L. Wu, S.L. Lee, R. Chistyakov, B. Abraham, JOM 63 (6) (2011) 48.
[11] 李志偉,“高功率脈衝磁控濺鍍技術介紹”,真空科技30卷˙第一期。
[12] https://zh.wikipedia.org/wiki/%E9%AB%98%E9%80%9F%E9%8B%BC
[13] https://kknews.cc/zh-tw/news/kxae82b.html
[14] 鄭牧謙,“應用超冷處理提升鎢鋼刀具壽命之研究”,正修科技大學,碩士論文, 2012年。[15] 肖繼明,“梯度塗層高速鋼刀具性能及磨損失效機理研究”,西安理工大學,博士論文,2007年。
[16] 鄔本祥、彭新海、陳倫、徐和平,塗層高速鋼絲錐高速攻絲加工中的性能和壽命試驗,成都成量工具集團有限公司,工具技術, 2018年第52卷No.3 P49-P55。
[17] 賈慶蓮、周蘭英、周煥雷,“TiN塗層高速鋼刀具耐熱性的研究”,工具技術, 2003年第37卷No1.P23-P25
[18] 張春紅、張寧,“高速鋼刀具磁控濺射離子鍍TiN塗層的工藝與性能研究”,工具技術,2007年第41卷No5.P34-P36
[19] 黃智強,氮化鈦塗層對前後向擠製沖頭磨耗之影響,碩士論文,國立高雄應用科技大學,2013。[20] 劉安鈞,麻田散鐵不銹鋼類鑽碳膜顯微組織及其機械性質之研究,碩士論文,中華大學,2009。[21] 楊雲凱,物理氣相沉積(PVD),奈米通訊 22卷 No.4 P33-P35.
[22] https://slideplayer.com/slide/4946622/
[23] 郝曉亮,磁控濺射鍍膜的原理與故障分析,電子工業專用設備 Jun, 2013 (總第220期)P57-P60.
[24] Bugaev S P,Koval N N,Sochugov N S,et al. Investigation of a high-curent pulsed magnetron discharge initiated in the low-pressure diffuse arc plasma [C]. International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV, Berkeley, CA, USA, 1996: 1074-6.
[25] Kouznetsov V, Macak K, Schneider J M, et al. A novel pulsed magnetron sputter technique utilizing very high target power densities [J]. Surface and Coatings Technology, 1999, 122(2/3): 209-293.
[26] Ander A. Discharge physics of high power impulse magnetron sputtering [J]. Surface and Coatings Technology, 2011, 205(S2): S1-S9.
[27] 吳志立、朱小鵬、雷明凱,“高功率脈衝磁控濺射沉積原理與工藝研究進展”,中國表面工程,第25卷第5期2012年10月。
[28] https://wenku.baidu.com/view/2e8bbc2e7e21af45b207a816.html"
[29] 唐偉忠著,薄膜材料製備原理、技術及應用第二版,北京:冶金工業出版社,2003。
[30] 吳大維、曾昭元、劉傳勝、張友珍、彭友貴、范湘軍,“高速鋼鍍氮化碳超硬塗層及其應用研究”,核技術,第26卷第4期2003年4月。
[31] 蕭兆育,2017年,金屬玻璃鍍層於含鈷高速鋼鑽頭於乾式切削7075鋁合金之性質影響與探討
[32] J. Thornton, “Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings”, Journal of Vacuum Seience and Technology, 11, pp. 666-670 (1974).
[33] 楊偉仁,“以直流磁控及高功率脈衝磁控濺鍍之TiO2光觸媒薄膜的特性分析比較”,國立交通大學,博士論文,2013年。[34] Darina Manova, Jurgen W. Gerlach and Stephan Mandl, Thin Film Deposition Using Energetic Ions, Materials 2010, 3(8), 4109-4141.
[35] Vidakis, N., A. Antoniadis, and N. Bilalis, The VDI 3198 indentation test evaluation of a reliable qualitative control for layered compounds. Journal of Materials Processing Technology, 2003. 143: p. 481-485.
[36] 吳明典,“沖頭物理蒸鍍塗層對黃銅微擠製摩擦效應之影響”,國立高雄應用科技大學,碩士論文,2013。[37] Masao Kamiyaa,Hideto Tanouea,Hirofumi Takikawaa,Makoto Takic,Yushi Hasegawac,Masao Kumagai, "Preparation of various DLC films by T-shaped filtered arc depositionand the effect of heat treatment on film properties",Vacuum 83(2009) 510-514.
[38] http://www.nachi-china.com.cn/web/
[39] 呂淮熏、李炳寅、鍾證違和鐘林樹,“刀具研磨進退刀製程規劃”,技術學刊,第22卷,第2 期,第57-64 頁(2007).
[40] Hasan Elmkhah, Faridreza Attarzadeh, Arash Fattah-alhosseini, Kwang Ho Kim Microstructural and electrochemical comparison between TiNcoatings deposited through HIPIMS and DCMS techniques, Journal of Alloys and Compounds, 2007.
[41] S.G.Harris, E.D.Doyle, Y.-C.Wong, P.R.Munroe, J.M.Cairney, J.M.Long, Reducing the macroparticle content of cathodic arc evaporated TiN coatings, Surface and Coating Technology, 2004.
[42] S Mahieu and D Depla,Reactive sputter deposition of TiN layers: modelling the growth by characterization of particle fluxes towards the substrate, JOURNAL OF PHYSICS D: APPLIED PHYSICS, 2008.
[43] F. Deschaux-Beaume, N. Fre'ty, T. Cutard, C. Colin, "Oxidation modelling of a Si3N4-TiN ceramic: Microstructure and kinetic laws,"Ceramics Interational,33 1331-1339 (1997).
[44] P. Kofstad, "High temperature corrosion, "Elsevier Applied Science, 289-298 (1988).
[45] F. Peni, J. Crampon, R. Duclos, "On the morphology and composition of the oxidized layer in Si3N4-based materials," Mater. Sci. Eng., A163 5-7 (1993).
[46] D.P. Butt, D. Albert, T.N. Taylor, "Kinetics of thermal oxidation of silicon nitride powders," J. Am. Ceram. Soc., 79 [11] 2809-2814 (1996).
[47] 顏永達,“氮化鈦的鋁化反應與氧化行為”,碩士論文,國立交通大學,2009。[48] Hong-Ying Chen,Oxidation behavior of titanium nitride films,Journal of Vacuum Science & Technology A 23, 1006 (2005)