[1] 維基百科,內燃機 (關鍵字搜尋 ),https://zh.wikipedia.org/wiki/内燃机。 [2] Zweiri, Y.H., Whidborne, J.F. and Seneviratne, L.D., 1999, “Complete Analytical Model of a Single-Cylinder Diesel Engine for Non-linear Control and Estimation”, Department of Mechanical Engineering, King’s College London, Strand, London, UK, Report EM/99/10, pp. 13-20, November. [3] Zweiri, Y.H., Whidborne, J.F. and Seneviratne, L.D., 2001, ”Detailed Analytical Model of a Single-Cylinder Diesel Engine in the Crank Angle Domain”, Proceedings of the Institution of Mechanical Engineers, Volume 215, pp. 1206-1216, Sage Publications, November.
[4] 蘇金佳, 1997,內燃機 ,三民書局台北市。
[5] 薛天山, 2008,內燃機 (修訂版 ),全華圖書,台北市。 ,全華圖書台北市。
[6] http://www.tyai.tyc.edu.tw/am/mtkao/file/car/a/car-a2.pdf,汽車引擎工作原 ,汽車引擎工作原 理。
[7] Chen, L., Zheng, T., Sun, F. and Wu, C., 2003, “The Power and Efficiency Characteristics for an Irreversible Otto Cycle”, International Journal of Ambient Energy, Volume 24,Issue 4, pp. 195-200.
[8] Wu, F., Chen, L., Sun,F., Wu, C., Guo, F. and Li, Q., 2006,“Quantum Degeneracy Effect on Performance of Irreversible Otto Cycle with Ideal Bose Gas”, Energy Conversion and Management, Volume 47, Issues 18–19, pp. 3008–3018.
[9] Ge, Y., Chen, L., Sun, F. and Wu, C., 2005, “The Effects of Variable Specific Heats of Working Fluid on the Performance of an Irreversible Otto Cycle”, International Journal of Exergy, Volume 2, Issue 3, pp. 1305-1310.
[10] Curto-Risso, P.L., Medina, A. and Hernández,A.C., 2008, “Theoretical and Simulated Models for an Irreversible Otto Cycle”, Journal of Applied Physics, Vol.104, Issue.9, pp 1-11.
[11] Ge, Y., Chen, L. and Sun, F., 2008, “Finite-Time Thermodynamic Modelling and Analysis of an Irreversible Otto-Cycle”, Applied Energy, Vol 85, pp.618–624.
[12] Zhao, Y. and Chen, J., 2007, “An Irreversible Heat Engine Model Including Three Typical Thermodynamic Cycles and Their Optimum Performance Analysis”, International Journal of Thermal Sciences,Volume 46, Issue 6, pp. 605-613.
[13] 陳呈芳, 1994,熱力學概論 ,全華圖書台北市。
[14] Kochev, I.S., 1990, “General Method for Active Balancing of Combined Shaking Moment and Torque Fluctuations in Planar Linkages”, Mechanism and Machine Theory, Vol.25, No.6, pp.679-687.
[15] Zhang, S., 1994, “A Constituting Method of Objective Function for the Dynamic Optimum Balance of Shaking Forces in Linkage”, Mechanism and Machine Theory, Volume 29, Issue 6, pp.829-835.
71
[16] Zhang, S. and Chen, J., 1995, “The Optimum Balance of Shaking Force and Shaking Moment of Linkage”, Mechanism and Machine Theory, Volume 30, Issue 4, pp. 589-597.
[17] Han,J.Y., 1996, “Complete Balancing of The Shaking Moment in Spatial Linkages by Adding Planar Noncircular Gears”, Archive of Applied Mechanics, Vol.67, No.1, pp 44–49.
[18] Arakelian, V.H. and Smith, M.R., 1999, “Complete Shaking Force and Shaking Moment Balancing of Linkages”, Mechanism and Machine Theory, Vol.34, No.8, pp. 1141–1153.
[19] Guilan, T., Haibo, F. and Weiyi, Z., 1999, “A New Method of Torque Compensation for High Speed Indexing Cam Mechanism”, Journal of Mechanical Design, Vol.121, No.2, pp.319-323.
[20] Wu, C.J. and Angeles, J., 2001, “The Optimum Synthesis of an Elastic Torque-Compensating Cam Mechanism”, Mechanism and Machine Theory, Vol.36, No.2, pp.245-259.
[21] Cunningham Industries Inc., 1972, “Elliptical Gears are Back and More Versatile than Ever”, Product Engineering, Vol. 43, No. 8, pp. 34-38.
[22] Kuczewski, M., April 1988, “Designing Elliptical Gears,” Machine Design, pp.116-118.
[23] Litvin, F.L., 1989, Theory of Gearing, National Aeronautics and Space Administration, D.C.
[24] Litvin, F.L., 1994, Gear Geometry and Applied Theory, Prentice Hall, New Jersey.
[25] Tong, S.H. and Yang, D. C.H., 1998, “Generation of Identical Noncircular Pitch Curves”, Transactions of the ASME, Journal of Mechanical Design, Vol.120, No.2, pp.337-341.
[26] Emura, T. and Arkawa, A., 1991, “A New Steering Mechanism Using Noncircular Gears (1st Report, A Proposal and Analysis of Mechanism)”, Transactions of the Japan Society of Mechanical Engineers. Series C, Vol.57, No.533, pp.154-159.
[27] Emura, T., Arkawa, A. and Suzuki, M., 1991, “A New Steering Mechanism Using Noncircular Gears (2st Report, Trail Manufacture and Experiments)”, Transactions of the Japan Society of Mechanical Engineers. Series C, Vol.57, No.533, pp.160-165.
[28] Emura, T. and Arkawa, A., 1992, “A New Steering Mechanism Using Noncircular Gears”, JSME International Journal, Series III, Vol.35, No.4, pp.604-610.
[29] Emura, T. and Arkawa, A., 1994, “Motion and Power Transmission Mechanism for Nonuniform Motion”, Journal of the Japan Society for Precision Engineering, Vol.60 No.10, pp.1422~ 1427.
[30] 黃國益 、林聖泉 ,1995,“插秧機橢圓齒輪式植構之運動分析 插秧機橢圓齒輪式植構之運動分析 ”,農業機械學刊 農業機械學刊 , 第 4卷,第 4期,第 35~45頁。
[31] 黃國益 、林聖泉 ,1995,“橢圓行星齒輪式插植機構之最佳化設計 橢圓行星齒輪式插植機構之最佳化設計 ”,農業機械學刊 農業機械學刊 , 第 5卷,第 4期,第 1~9頁。
[32] Tsay, M.F. and Fong, Z.H., 2005, “Study on the Generalized Mathematical Model of Noncircular Gear”, Mathematical and Computer Modelling, Vol.41, No.4-5, pp.555-569.
72
[33] Mundo, D., Fragomeni, G. and Danieli, G.A., 2006, “A First Experimental Comparison between Non-Circular Gears Characterized by Teeth Designed According to Different Meshing Laws”, Proceeding of EuCoMeS, 1st European Conference on Mechanism Science, February 21-26, pp.1-11.
[34] Mundo, D., 2006, “Geometric Design of a Planetray Gear Train with Non-Circular Gears”, Mechanism and Machine Theory, Vol.41, pp.456-472.
[35] Chang, S.L. and Tsay, C.B., 1995, “Mathematical Model of Elliptical Gear Generated by Shapers”, Journal of the Chinese Society of Mechanical Engineers, Vol.16, No.5, pp.415-423.
[36] Chang, S.L., Tsay, C.B. and Wu, L.I., 1996, “Mathematical Model and Undercutting Analysis of Elliptical Gears Generated by Rack Cutters”, Mechanical and Machine Theory, Vol.31, No.7, pp.879-890.
[37] Chang, S.L. and Tsay, C.B., 1998, “Computerized Tooth Profile Generation and Undercut Analysis of Noncircular Gears Manufactured with Shaper Cutters”, Transactions of the ASME, Journal of Mechanical Design, Vol.120, pp.92-99.
[38] 高雷強 、印建平 、葛敬霞 、石建玲 ,2005,“基於非圓齒輪節曲線的程序設計 基於非圓齒輪節曲線的程序設計 ”, 設備計與維修,第 80~82頁。
[39] Danieli, G.A. and Mundo, D., 2005, “New Developments in Variable Radius Gears Using Constant Pressure Angle Teeth”, Mechanism and Machine Theory, Vol.40, pp.203-217.
[40] 顏鴻森、吳隆庸, 2014,機構學 (四版 ),東華出版社,台北市第 ,東華出版社台北市第 109~220頁。
[41] Norton, R.L., 2012 , Kinematics and Design of Machinery (SI Units), McGraw-Hill, New York, pp. 591-593.
[42] 張信良 ,1992,”漸開線橢圓形齒輪之設計 漸開線橢圓形齒輪之設計 ”,國立清華大學動力機械研究所碩士論 國立清華大學動力機械研究所碩士論 文。
[43] 黃瑜智 ,2009,”具非圓形齒輪之轉向機構設計 具非圓形齒輪之轉向機構設計 具非圓形齒輪之轉向機構設計 ”,國立虎尾科技大學機械與電工 國立虎尾科技大學機械與電工 程研究所碩士論文。[44] 張信良 ,1996,”電腦數控滾齒機之輪削模擬 電腦數控滾齒機之輪削模擬 電腦數控滾齒機之輪削模擬 ”,國立交通大學機械工程研究所 國立交通大學機械工程研究所 博士論文。