|
Z. He, H. Wu, and Y. Cao, "Recent advances in polymer solar cells: Realization of high device performance by incorporating water/alcohol‐soluble conjugated polymers as electrode buffer layer," Advanced Materials, vol. 26, no. 7, pp. 1006-1024, 2014. [2]L. L. Kazmerski, "Solar photovoltaics R&D at the tipping point: A 2005 technology overview," (in English), Journal of Electron Spectroscopy and Related Phenomena, vol. 150, no. 2-3, pp. 105-135, Feb 2006, doi: 10.1016/j.elspec.2005.09.004. [3]T. N. R. E. Laboratory. "Best Research-Cell Efficiency Chart | Photovoltaic Research | NREL." https://www.nrel.gov/pv/cell-efficiency.html (accessed. [4]W. Hoagland, "Solar-Energy," (in English), Scientific American, vol. 273, no. 3, pp. 170-173, Sep 1995. [5]A. A. Sutanto et al., "Solvent-assisted crystallization via a delayed-annealing approach for highly efficient hybrid mesoscopic/planar perovskite solar cells," Solar Energy Materials and Solar Cells, vol. 172, pp. 270-276, 2017. [6]G. Niu, X. Guo, and L. Wang, "Review of recent progress in chemical stability of perovskite solar cells," Journal of Materials Chemistry A, vol. 3, no. 17, pp. 8970-8980, 2015. [7]G. Xing et al., "Long-range balanced electron-and hole-transport lengths in organic-inorganic CH3NH3PbI3," Science, vol. 342, no. 6156, pp. 344-347, 2013. [8]H.-S. Kim et al., "Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%," Scientific reports, vol. 2, p. 591, 2012. [9]D. Bi et al., "Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%," Nature Energy, vol. 1, no. 10, p. 16142, 2016. [10]D. Liu, J. Yang, and T. L. Kelly, "Compact layer free perovskite solar cells with 13.5% efficiency," Journal of the American Chemical Society, vol. 136, no. 49, pp. 17116-17122, 2014. [11]J. Choi, S. Song, M. T. Hörantner, H. J. Snaith, and T. Park, "Well-defined nanostructured, single-crystalline TiO2 electron transport layer for efficient planar perovskite solar cells," ACS nano, vol. 10, no. 6, pp. 6029-6036, 2016. [12]Ç. Kırbıyık et al., "Enhancing the c-TiO2 based perovskite solar cell performance via modification by a serial of boronic acid derivative self-assembled monolayers," Applied Surface Science, vol. 423, pp. 521-527, 2017. [13]S. Jang et al., "Facile fabrication of three-dimensional TiO2 structures for highly efficient perovskite solar cells," Nano Energy, vol. 22, pp. 499-506, 2016. [14]D. B. Mitzi, "Templating and structural engineering in organic–inorganic perovskites," Journal of the Chemical Society, Dalton Transactions, no. 1, pp. 1-12, 2001. [15]A. Kojima, K. Teshima, Y. Shirai, and T. Miyasaka, "Organometal halide perovskites as visible-light sensitizers for photovoltaic cells," Journal of the American Chemical Society, vol. 131, no. 17, pp. 6050-6051, 2009. [16]C. Momblona et al., "Efficient vacuum deposited pin and nip perovskite solar cells employing doped charge transport layers," Energy & Environmental Science, vol. 9, no. 11, pp. 3456-3463, 2016. [17]J. H. Heo, H. J. Han, D. Kim, T. K. Ahn, and S. H. Im, "Hysteresis-less inverted CH 3 NH 3 PbI 3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency," Energy & Environmental Science, vol. 8, no. 5, pp. 1602-1608, 2015. [18]W. Ke et al., "Efficient hole-blocking layer-free planar halide perovskite thin-film solar cells," Nature Communications, vol. 6, p. 6700, 2015. [19]T. Ye et al., "Pinhole-free mixed perovskite film for bending durable mixed perovskite solar cells," Solar Energy Materials and Solar Cells, vol. 175, pp. 111-117, 2018. [20]S. Mastroianni et al., "Analysing the effect of crystal size and structure in highly efficient CH 3 NH 3 PbI 3 perovskite solar cells by spatially resolved photo-and electroluminescence imaging," Nanoscale, vol. 7, no. 46, pp. 19653-19662, 2015. [21]S. M. Kang et al., "Moth‐Eye TiO2 Layer for Improving Light Harvesting Efficiency in Perovskite Solar Cells," Small, vol. 12, no. 18, pp. 2443-2449, 2016. [22]J. T.-W. Wang et al., "Low-temperature processed electron collection layers of graphene/TiO2 nanocomposites in thin film perovskite solar cells," Nano letters, vol. 14, no. 2, pp. 724-730, 2013. [23]M. A. Henderson, W. S. Epling, C. L. Perkins, C. H. Peden, and U. Diebold, "Interaction of molecular oxygen with the vacuum-annealed TiO2 (110) surface: molecular and dissociative channels," The Journal of Physical Chemistry B, vol. 103, no. 25, pp. 5328-5337, 1999. [24]S. U. Khan, M. Al-Shahry, and W. B. Ingler, "Efficient photochemical water splitting by a chemically modified n-TiO2," science, vol. 297, no. 5590, pp. 2243-2245, 2002. [25]Y.-B. Tang et al., "Incorporation of graphenes in nanostructured TiO2 films via molecular grafting for dye-sensitized solar cell application," Acs Nano, vol. 4, no. 6, pp. 3482-3488, 2010. [26]J.-Y. Lin, C.-Y. Chan, and S.-W. Chou, "Electrophoretic deposition of transparent MoS 2–graphene nanosheet composite films as counter electrodes in dye-sensitized solar cells," Chemical communications, vol. 49, no. 14, pp. 1440-1442, 2013. [27]A. Formento, L. Montanaro, and M. V. Swain, "Micromechanical Characterization of Electrophoretic‐Deposited Green Films," Journal of the American Ceramic Society, vol. 82, no. 12, pp. 3521-3528, 1999. [28]T. Jiang et al., "Surface functionalization of titanium with chitosan/gelatin via electrophoretic deposition: characterization and cell behavior," Biomacromolecules, vol. 11, no. 5, pp. 1254-1260, 2010. [29]M. Shimbo, K. Tanzawa, M. Miyakawa, and T. Emoto, "Electrophoretic deposition of glass powder for passivation of high voltage transistors," Journal of the Electrochemical Society, vol. 132, no. 2, pp. 393-398, 1985. [30]J. You et al., "Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers," Nature nanotechnology, vol. 11, no. 1, p. 75, 2016. [31]H. Choi et al., "The effect of TiCl4-treated TiO2 compact layer on the performance of dye-sensitized solar cell," Current Applied Physics, vol. 12, no. 3, pp. 737-741, 2012. [32]Q. Chen et al., "Planar heterojunction perovskite solar cells via vapor-assisted solution process," Journal of the American Chemical Society, vol. 136, no. 2, pp. 622-625, 2013. [33]J. A. Christians, R. C. Fung, and P. V. Kamat, "An inorganic hole conductor for organo-lead halide perovskite solar cells. Improved hole conductivity with copper iodide," Journal of the American Chemical Society, vol. 136, no. 2, pp. 758-764, 2013. [34]H. Zhou et al., "Interface engineering of highly efficient perovskite solar cells," Science, vol. 345, no. 6196, pp. 542-546, 2014. [35]N. J. Jeon et al., "A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells," Nature Energy, vol. 3, no. 8, p. 682, 2018. [36]J. Chen and N.-G. Park, "Inorganic hole transporting materials for stable and high efficiency perovskite solar cells," The Journal of Physical Chemistry C, vol. 122, no. 25, pp. 14039-14063, 2018. [37]Y. Wu et al., "Retarding the crystallization of PbI2 for highly reproducible planar-structured perovskite solar cells via sequential deposition," Energy & Environmental Science, vol. 7, no. 9, pp. 2934-2938, 2014. [38]J.-Y. Lin, C.-Y. Chan, and S.-W. Chou, "Electrophoretic deposition of transparent MoS2–graphene nanosheet composite films as counter electrodes in dye-sensitized solar cells," Chemical communications, vol. 49, no. 14, pp. 1440-1442, 2013. [39]陳政廷, "混合有機色素分子共增感對色素增感太陽電池光電轉換效率的影響," 成功大學化學工程學系學位論文, pp. 1-114, 2008. [40]E. L. Unger et al., "Hysteresis and transient behavior in current–voltage measurements of hybrid-perovskite absorber solar cells," Energy & Environmental Science, vol. 7, no. 11, pp. 3690-3698, 2014. [41]N. C. Unmiversity. "Field-emission scanning electron micros." https://www.google.com/search?q=Electromechanical+hole+transport+layer+material&oq=Electromechanical+hole+transport+layer+material&aqs=chrome..69i57j33.1058j0j7&sourceid=chrome&ie=UTF-8 (accessed. [42]林正偉, "氧化鋅-鋁多層膜之結構與光電特性研究," 成功大學光電科學與工程研究所學位論文, pp. 1-81, 2004. [43]S. Brosel-Oliu, N. Uria, N. Abramova, and A. Bratov. "Impedimetric Sensors for Bacteria Detection, Biosensors - Micro and Nanoscale Applications, Toonika, IntechOpen." http://www.intechopen.com/books/biosensors-micro-and-nanoscale-applications/impedimetric-sensors-for-bacteria-detection (accessed. [44]A. J. Bard and L. R. Faulkner, "Fundamentals and applications," Electrochemical Methods, vol. 2, p. 482, 2001. [45]林明獻, 太陽能電池技術入門. 全華圖書股份有限公司, 1998. [46]I. Zhitomirsky, "Electrophoretic deposition of chemically bonded ceramics in the system CaO-SiO2-P2O5," Journal of materials science letters, vol. 17, no. 24, pp. 2101-2104, 1998. [47]呂宗昕, 圖解奈米科技與光觸媒. 商周, 2003. [48]N. Mohammadian, A. Moshaii, A. Alizadeh, S. Gharibzadeh, and R. Mohammadpour, "Influence of perovskite morphology on slow and fast charge transport and hysteresis in the perovskite solar cells," The journal of physical chemistry letters, vol. 7, no. 22, pp. 4614-4621, 2016. [49]S. D. Stranks et al., "Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber," Science, vol. 342, no. 6156, pp. 341-344, 2013. [50]G. Niu, W. Li, F. Meng, L. Wang, H. Dong, and Y. Qiu, "Study on the stability of CH3NH3PbI3 films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells," Journal of Materials Chemistry A, vol. 2, no. 3, pp. 705-710, 2014. [51]W. Li, J. Li, L. Wang, G. Niu, R. Gao, and Y. Qiu, "Post modification of perovskite sensitized solar cells by aluminum oxide for enhanced performance," Journal of Materials Chemistry A, vol. 1, no. 38, pp. 11735-11740, 2013.
|