[1] 何主亮、張景棠,(2004),不可忽視的陶瓷鍍膜,科學發展,第375期,頁16-23
[2] 劉愛華,(2012),PVD氮化物塗層的高溫摩擦磨損特性及機理研究,山東大學機械製造及其自動化博士學位論文
[3] 李志偉,(2017),高功率脈衝磁控濺鍍技術介紹,真空科技,第30卷,第1期,頁33-48。
[4] Kouznetsov, V., Maca´k, K., Schneider, J. M., Helmersson, U., Petrov, I. (1999), “A novel pulsed magnetron sputter technique utilizing very high target power densities”, Surface and Coatings Technology 122, 290-293.
[5] 林煜喆,(2018),氮化鈦薄膜機械性質研究,國立虎尾科技大學機械與電腦輔助工程系碩士學位論文[6] G.Mark, E. Parra, R. Bandorf, M. Vergöhl, “New superimposed pulsed plasma technology using High Power Impulse Magnetron Sputtering (HiPIMS) combined with DC or MF-frequency”, Proceedings of Society of Vacuum Coaters. 53rd Annual Technical Conference 2010:Orlando, FL April 17-22 (2010) pp.224-228.
[7] Wasa, K., Kanno, I., Kotera, H., (1991), Handbook of Sputter Deposition Technology, William Andrew, New York, 45-75.
[8] 葉詠津,(2008),反應磁控濺鍍陶瓷-金屬薄膜之光學特性研究,中原大學化學工程學系碩士學位論文[9] André Anders, J. Vac. Sci. Technol. A 28 (2010) 783.
[10] J.A. Thornon, (1974), “Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings”. Journal of Vacuum Science Technology. Vol.11, pp.666-670
[11] 李洪濤、蔣百靈、楊波、曹政,(2011),一種新穎的磁控濺射純Cr薄膜結構區域模型,人工晶體學報,第40卷,第4期,1071-1076
[12] 李洪濤、蔣百靈、楊波、付楊洪,(2010),電場環境對磁控濺射純Cr薄膜沉積過程的影響,功能材料,第41卷,第11期,2006-2009頁
[13] 王浩然、邱長軍、曾小安、張文、王曉婧、劉艷紅、李懷林,(2017),溫度對純Cr塗層表面形貌和抗腐蝕性能的影響,表面技術,第46卷,第6期,192-196頁
[14] 趙偉人、李鳴楚、伍錦添、於元炯,(2004),反應磁控濺射制備的Cr-N薄膜的成相行為,第11卷,第4期,26-28頁
[15] A. Barata, L. Cunha, C. Moura, “Characterisation of chromium nitride films produced by PVD techniques”, Thin Solid Films, 398 – 399, (2001), 501–506
[16] M. Béger, P. Jurči, P. Grgač, S. Mečiar, M. Kusý, J. Horník, (2013), “CrxNy coatings prepared by magnetron sputtering method”, Kovove materialy - Metallic Materials, 51 ,1–10
[17] 車德良, (2005),多弧離子鍍氮化物薄膜的性能及應用,大連理工大學碩士學位論文
[18] X. Zuo, F. Xia, D. Zhang, P. L. Ke, Q. M. Wang, A. Y. Wang,(2017), “The effect of substrate bias on the characteristics of CrN coatings deposited by DC-superimposed HiPIMS system”, International Journal of Modern Physics B,Vol.31, 1744032 (5 pages)
[19] C. Lorenzo-Martin, O. Ajayi a, A. Erdemir, G.R. Fenske, R. Wei, (2003), Effect of microstructure and thickness on the friction and wear behavior of CrN coatings, Wear, 302, 963-971
[20] 宋慧瑾、鄢强、李玫、董志红、馮威、朱曉東、孫艷,(2015),工藝參數對CrNx塗層性能的影響,高技術通訊,第25卷,第3期,300-306頁
[21] A. P. Ehiasarian,, W.-D. Mu--nz, L. Hultman, U. Helmersson, I. Petrov, (2003), “High power pulsed magnetron sputtered CrNx films”, Surface and Coatings Technology, 163 –164, 267.
[22] Vidakis, N., A. Antoniadis, and N. Bilalis, (2003), The VDI 3198 indentation test evaluation of a reliable qualitative control for layered compounds. Journal of Materials Processing Technology, 143, 481-485.
[23] 葉瀚文,(2011),利用非平衡磁控濺鍍 Cr-C-N 薄膜機械性質之研究,國立高雄第一科技大學機械與自動化工程系碩士學位論文