|
Bounds, S., Moran, G., Pericleous, K., Cross, M., Croft, T.N., 2000. “Computational model for defect prediction in shape castings based on the interaction of free surface flow, heat transfer, and solidification phenomena,” Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, v31, n3, p515-527 Caton, M.J., Jones, J.W., Allison, J.E., 2001. “The influence of heat treatment and solidification time on the behavior of small-fatigue-cracks in a cast aluminum alloy,” Materials Science and Engineering A, v314, n1-2, p81-85 Darwish, S.M.H., 1993. “Computer-assisted riser design and placemant,” International Journal of Materials & Product Technology, v12, n1, p43-58 Drezet, J.-M, Rappaz, M., Krahenbuhl, Y., 1996. “Modelling of thermomechanical effects during direct chill casting of AA1201 aluminium alloy,” Materials Science Forum, v217-222, pt1 Gandin, Ch.-A, Brechet, Y., Rappaz, M., Canova, G.., Ashby, M., Shercliff, H., 2002. “Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys,” Acta Materialia, v50, n5, p901-927 Gardiner, R.W., Goodwin, P.S., Dodd, S.B., Viney, B.W., 1996. “Non-equilibrium synthesis of new materials,” Advanced Performance Materials, v3, n3-4, p343-364 Gwyn, Michael A., 1998. “Cost-effective casting design: what every foundryman and designer should know,” Modern Casting, v88, n6, p47-51 Jung Wook Cho, Shibata, H., 2001. “Effect of solidification of mold fluxes on the heat transfer in casting mold,” Journal of Non-Crystalline Solids, v282, n1 Kreziak, G.., Rigaut, C., Santarini, M., 1993. “Low pressure permanent mould process simulation of a thin wall aluminum casting,” Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, v A173, n1-2 Midea, Anthony, Nariman, Rafael, Yancey, Bob, Faivre, Tony, 2000. “Using Computer Modeling to Optimize Casting Processes” Modern Casting, v90, n5, 4pp Sabau, A.S., Viswanathan, S., 2002. “Microporosity prediction in aluminum alloy castings,” Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, v33, n2, p243-255 Schneider, Mark C.,Andersen, Soeren, 2000. “Use simulation to analyze macrosegregation, hot tears, heat treatment in steel castings,” Modern Casting, v90,n5, 5pp Seetharamu, K.N., Paragasam, R., Quadir, G.A., Zainal, Z.A., Prasad, B.S., Sundararajan, T., 2001. “Finite element modeling of solidification phenomena,” Sadhana-Academy Proceedings in Engineering Sciences, v26, n1-2, p103-120 Shenefelt, Jeffrey R., Luck, Rogelio, Berry, John T., Taylor, Robert P., 1999. “Solidification modeling and porosity control in aluminum alloy castings,” Manufacturing Science and Engineering, Nov14-Nov19, Nashville, TN, USA, p507-511 Spittle, J.A., Brown, S.G..R., Wishart, H., 1999. “Experimental and computational evaluation of the influence of permanent mould design on solidification of A17SiMg casting,” Light Metals: Proceedings of Sessions, TMS Annual Meeting, Proceedings of the 1999 128th TMS annual Meeting ‘Light Metals 1999’, Feb 28-Mar 4, San Diego, CA, USA, p951-958 Tiwari, M.K., Roy, D., 2002. “Minimization of internal shrinkage in castings using synthesis of neural networks,” International Journal of Smart Engineering System Design, v4, n3, p205-214. Viets, Roman, Breuer, Markus, Haferkamp, Heinz, Kruessel, Thomas, Niemeyer, Matthias, 1999. “Solidification process and infrared image characteristics of permanent mold castings,” Proceedings of SPIE — The International Society for Optical Engineering, v3700, Proceedings of the1999 Thermosense XXI, Apr 6-Apr 8 1999, Orlando, FL, USA, p132-140 Wright, T.C., Campbell, John, 1998. “Enhancing aluminum casting solidification via cooling fins,” Modern Casting, v88, n11, p48-50 Zabaras, Nicholas, Nguyen, T. Hung, 1995. “Control of the freezing interface morphology in solidification processes in the presence of natural convection,” International Journal for Numerical Methods in Engineering, v38, n9, p1555-1578
|